When working with polyurethane-elastomers, release agents ensure that the form can be safely removed from the formliner. Release agents are also used in producing replicas to protect the cast, e.g. from discoloration. Release agents are not necessarily needed when working with silicone-elastomers, but are recommended.
RELEASE WAX TL
A ready-to-use concrete removal agent to apply to US Formliner formliners and solvent resistant, absorbing casing bases. It does not cause any adhesion issues when further processing the concrete.
STRIPPING WAX TL-SO
A ready-to-use concrete removal agent for long encasing periods. The properties coincide with the Release Wax TL. A chemically active release effect ensures a problem-free removal in the case of drying periods of more than 24 hours.
STRIPPING WAX TL-W
A watery, ready-to-use concrete removal agent, it is suitable for use with US Formliner formliners as well as non-absorbent casing bases. It protects from staining and imprints, without causing adhesive problems during later finishing.
GYPSUM RELEASE AGENT GTM
A watery ready-to-use removal agent for plaster molds from elastic synthetic forms, it reduces the formation of bubbles on the plaster surface. Later layers of coating have no adhesive problems.
A ready-to-use release agent for mold making, it ensures a safe release effect when using two-component resins on polyurethane or epoxy-resin bases. The wax is also suited for separating silicone from silicone.
A polishable release agent for mold making, which frequently makes sealing the casts with an absorbent base expendable, it is especially applied on polyurethane forms and plaster casts.
A water-soluble lacquer for a protective preparation of severely absorbent bases, the product prevents staining of the casts and possible adhesion of US Formliner elastomers on a silicone-basis.