Epoxy Resins

Filled casting resins

EPOXY BT

A pigmented, thixotropic epoxy resin coating. In building construction, it is applied as a wall and base coating, and in underground construction it is used as a coating for pipes, shafts and water collection basins.

Epoxy Compound 51/30

RECKLI Epoxy Compound 51/30 is a ready-to-use, easily flexible, two-component casting resin for the production of models, reliefs, ornaments, frames, decorative parts or usable as a casting mass in construction. Its colour is creamy-white.

Epoxy Compound 61/20

RECKLI Epoxy Compound 61/20 is a ready-to-use, two-component casting resin for the production of models, reliefs, ornaments, frames and decorative parts. Its colour is creamy-white.

Epoxy Compound 71/30

RECKLI Epoxy Compound 71/30 is a ready-to-use, two-component casting resin for the production of models, reliefs, ornaments, frames, decorative parts or usable as a casting mass in construction. Its color is creamy-white.

Thixotropic resins

Adhesive Paste EP

RECKLI Adhesive Paste EP is a slightly thixotropic, solvent-free, two-component adhesive resin for the adhesion of wood, paperboard, natural or synthetic stone, various metals and plastics. Its colour is creamy-white.

Epoxy Flex Filler

A two-component spatula material on a epoxy resign base. The product hardens virtually free of shrinkage and is used for touching up wooden, steel, and concrete bases, which are subsequently coated.

Epoxy GS

A base- and adhesive spatula mass on an epoxy resin base. It levels out holes, depressions and blemishes and is suited for application on cement-bound bases, wood, ceramic, steel and polystyrene.

EPOXY-GF-FILLER

A glass-fiber reinforced, synthetic spatula mass on an epoxy resin base. The impact-, pressure-, and bend-resistant spatula mass is applied as a protective casing for moldings. It can be applied to moist bases and hardens nearly free of shrinkage.

RAPID-EPOXY TYPE LS

A repair-adhesive mortar on an epoxy resin base. It fills irregularities and blemishes on cement-bound bases or steel surfaces and is suited for adhesions in the floor- or wall-area.

SUPPORTING MASS EP-F TYPE VB

A modified epoxy resin with the same properties and areas of application as Support Material EP-F Type L, yet with a lower specific weight.

Unfilled casting resins

Construction Resin EP

A modified epoxy resin. Depending on the resin content, a mortar mixture, flow coating or spatula material with excellent adhesion is made. A particular area of application is the production of decorative quartzite floors.

Construction Resin EP Rapid

RECKLI Construction Resin EP Rapid is a multi-application two-component resin. It is suitable for multi-application in construction: Coatings, adhesions, as a bonding course or a binding agent for polymer concrete, mortar, screed, -casting masses or for synthetic resin sandstone mixtures. It binds quickly and is proven at low temperatures. The product is colorless.

ELECTRO RESIN EP

A modified epoxy resin. This product has a long pot life with a low-stress hardening and is applied in casting large-volume or heat-sensitive building elements.

EPOXY GC

A modified epoxy resin. Thanks to its heat deflection temperature, short pot life and low viscosity, it is suited as a binder for the production of GFK laminates in casting, spraying and hand lay-up processes.

EPOXY LB

A modified epoxy resing with significantly improved light- and yellowing- resistance. The product serves as a binding agent in the production of light stone carpets and quartzite floors with more coarse granulation.

EPOXY LB CLEAR

A modified epoxy resin which is analog to EPOXY LB, which is however applied as a binding agent in the production of light stone carpets and quartzite floors with finer granulation.

Epoxy PB

A modified epoxy resin, very heat resistant and stress-proof. It is used as a binding agent in the production of polymer concrete. The low viscosity ensures a high degree of filling and excellent processability of the polymer concrete.

Epoxy WST

A modified epoxy resing which is used in mold- and form-making. Depending on the added agent, it can be blended for stable backfilling or as a hard, quickly-drying casting compound.

Flooring Resin EP

RECKLI Flooring Resin EP is a low-viscosity, two-component resin. It is particularly suitable as a binding agent for liquid-tight screeds and mortars and may be applied as a well-penetrating primer on cementitious substrates or as a sealant for bedding layers. The product is colorless.

Injection Resin EP

A modified epoxy resin with a long pot life to fill fissures in the concrete building parts. Even the most fine cracks can be safely filled in the casting process or with a high- or low-pressure injection pump.

Polymer Resin EP

RECKLI Polymer Resin EP is a fluid, two-component resin which is particularly suited as a binding agent for backfilling in blockmoulding. The product is transparent.

Filling Material, Thickener & Color Pastes

Color Pastes

Si-Colour Paste

RECKLI SI Colour paste serves as colouration for RECKLI SI-casting masses and moulding pastes. Its colour is green.

Polyurethan-Elastomere

Accessories

RECKLI-PUR-Color Paste

For the pigmention principally of colourless RECKLI PUR Elastomers.

Stop Off Paste PUR

RECKLI Stop Off Paste PUR is a cold-setting, elastic, two-component, polyurethane-based plastic to produce tailor-made barriers on RECKLI textured formliners. The freshly mixed product becomes a paste when poured and allows the creation of custom elastic barriers for the production of concrete elements using textured formliners and moulds.

Elastic Polyurethane-Elastomeres

Platinum

US Formliner Platinum is a solvent-free, rubbery-elastic, liquid, two-component polyurethane, cold-curing, almost shrinkage-free, after curing sliceable and grindable. It shows high chemical resistance against aqueous alkali, especially concrete. Its standard color is gray.

PUR-Elastomer A45

A castable polyurethane elastomer in a softer adjustment. It is suited especially well for producing long-lasting casing formliners for patterned exposed concrete elements. Standard color is gray.

PUR-Elastomer A70

RECKLI PUR-Elastomer A70 is a pourable, elastic, two-component synthetic resin for the production of formliners and structural moulds, moulded parts or recesses in concrete construction. Its colour is grey.

PUR-Elastomer K

RECKLI PUR-Elastomer K is a pourable, elastic, two-component synthetic resin for the production of formliners and structural moulds, moulded parts or recesses in concrete construction. Its colour is grey.

PUR-ELASTOMER SR30

A castable polyurethane elastomer with increased tear resistance and low-level firmness. It serves the production of long-lasting formliners for concrete elements with a large pattern depth or light undercuts. Standard color is gray.

Silver

US Formliner Silver is a solvent-free, rubbery-elastic, liquid, two-component polyurethane, cold-curing, almost shrinkage-free, after curing sliceable and grindable. It shows high chemical resistance against aqueous alkali, especially concrete. Its standard color is dark gray.

Spreadable compounds

Elasto-Filler

A brushable and spatula-spreadable two-component synthetic. The product is suited for touching up on and repairing molds, installations, formliners and forms made of RECKLI PURE elastomers.

PUR-ELASTOMER THIX

A polyurethane elastomer for use in vertical and overhead areas. It particularly serves the production of concrete castings for forms with a high life-span.

Viscoplastic Polyurethane-Elastomers

PUR-Compound A75

A viscoplastic polyurethane casting material. Suited for producing hollows or form parts in machine-, tool-, form- and mold-making, that are exposed to high pressures or abrasion.

PUR-Compound A85

A viscoplastic polyurethane casting material. Can be applied as the Pure Casting Material 75, but differs in its degree of firmness.

RECK-o-lan 85 Type N

RECK-o-lan 85 Type N is a two-component synthetic resin for the production of hard-wearing moulded parts in the construction of machinery, tools, moulds and models. The product is particularly suitable for recesses in concrete construction. Its colour is grey.

RECK-o-lan 95 Type N

A viscoplastic polyurethane casting material. May be applied like the RECK-O-Lan-85, but has a higher degree of firmness.

Release Agents

Concrete removal agents

Stripping Wax TL

A ready-to-use concrete removal agent to apply to US Formliner formliners and solvent resistant, absorbing casing bases. It does not cause any adhesion issues when further processing the concrete.

Stripping Wax TL-Eco

RECKLI Stripping Wax TL-Eco is a high-quality, dilute, demoulding agent from renewable material, specially developed for RECKLI formliners. The product physically works via film formation. It is suitable for application on non-absorbent formwork made of sealed wood or plastic.

Stripping Wax TL-SO

A ready-to-use concrete removal agent for long encasing periods. The properties coincide with the Release Wax TL. A chemically active release effect ensures a problem-free removal in the case of drying periods of more than 24 hours.

Stripping Wax TL-W

A watery, ready-to-use concrete removal agent, it is suitable for use with US Formliner formliners as well as non-absorbent casing bases. It protects from staining and imprints, without causing adhesive problems during later finishing.

Release agent other applications

Gypsum Release Agent GTM

A watery ready-to-use removal agent for plaster molds from elastic synthetic forms, it reduces the formation of bubbles on the plaster surface. Later layers of coating have no adhesive problems.

Silicone Casting Materials

Addition cross-linking, castable

SI-COMPOUND 21 AV

A silicone molding material for standard requirements. The product is virtually free from shrinkage and is applied in producing highly elastic, dimensionally stable forms in a full-casting or case-casting process.

SI-COMPOUND 26 AV

A silicone molding material for high requirements. The silicone synthetic has the same properties and areas of applications as SI Casting Material 21 AV, but is more tear-resistant.

Condensation cross-linking, castable

EcoSil 25

RECKLI EcoSil 25 is a pourable, two-component silicone rubber and intended as deforming material for single use. Its color is beige.

SI-COMPOUND 10.15

A silicone molding material for standard requirements. It is suitable for producing highly elastic, very delicate forms in a full-casting or casing-casting process and reproduces detailed patterns.

SI-COMPOUND 20

A silicone molding material for high requirements. The is used in the production of highly elastic, especially tear-proof forms and reproduces even constrictions and undercuts true to detail.

SI-COMPOUND 20 TRANSLUCENT

Can be applied the same as SI casting material 20. The silicone material is translucent.

Si-Compound 6.25

A silicone molding material for simple requirements. It is suited for producing elastic relief- and profile forms and reproduces even delicate surface structured true to detail.

Condensation cross-linking; spatula-spreadable

SI-MOLD PASTE HR-N

A silicone mold paste for working on vertical surfaces and overhead areas. The product is applied in producing elastic and thin-walled forms.

Supplementary Products

Si-Colour Paste

RECKLI SI Colour paste serves as colouration for RECKLI SI-casting masses and moulding pastes. Its colour is green.

Surface Design

Surface Treatment

Antigraffiti

Graffix Basic

RECKLI Graffix Basic is a dilute impregnation for the treatment of concrete surfaces and other hard, absorbent mineral substrates. It demonstrates a UV-stable, breathable and open to water vapor diffusion protective impregnation with anti-adhesion properties.

Graffix Basic Cleanser

RECKLI Graffix Basic Cleanser is a gel-type cleaning agent for the removal of graffiti. It is specially formulated for application on concrete surfaces, which have been treated with RECKLI Graffix Basic.

Epoxides, containing solvents

Epoxy-Seal

RECKLI Epoxy-Seal is a solvent-containing, two-component special lacquer for pigmented sealing of concrete and screed floors in garages, retail and showrooms, balconies and terraces*. Its colour is grey.

 

* in the sense of Guideline 42/2004/EG, Appendix I, 1.1j

Epoxy-Solution

RECKLI Epoxy-Solution is a solvent-containing, two-component plastic for sealing and increasing the stability of porous, mineral surfaces.

Polyurethane, contains solvents

PUR Seal B75

RECKLI PUR Seal B75 is a low-solvent, one-component sealant for concrete and screed floors, slabs, multilayer boards and square timbers in the concrete and construction industry. The colour is brown-transparent.

PUR Seal L75

RECKLI PUR Seal L75 is a low-solvent, one-component sealant for concrete and screed floors, slabs, multilayer boards and square timbers in the concrete and construction industry. Additionally, the product is suitable for sealing wooden flooring and parquet*. PUR Sealant L75 is colourless and transparent.

 

* in the sense of Guideline 42/2004/EG, Appendix I, 1.1i

PUR-Sealant

RECKLI PUR Seal is a moisture-curing, one-component fluid plastic for the preparation of absorbent, solvent-resistant model surfaces in mould construction. The product is particularly suited for the waterproofing of timber formwork, chipboard, multiplex, MDF or wood core plywood. The colour is brown-transparent.

Surface Protection

OS D

RECKLI OS D is a colorless, dilute impregnation with a silicone base. The product is suitable for the handling of absorbent concrete components.

OS HO

RECKLI OS HO is a colorless, dilute impregnation. The product is suitable for the treatment of absorbent, mineral substrates and particularly for the protection of façades or other vertical surfaces made of concrete.

OS Intensiv

RECKLI OS Intensiv is a dilute impregnation with a highly cross-linked acrylate polymer base. The product is especially suitable for treating vertical, exposed concrete surfaces.

OS Premium

RECKLI OS Premium is a colorless, solvent-free impregnation. The product is suitable for the treatment of absorbent, mineral substrates and particularly for the protection of concrete paving, slabs and façades.

Thinners & Cleaners

Cleaners

Cleanser 64

RECKLI Cleanser 64 is a liquid, acidic and free of hydrochloric acid cleaning agent for the removal of cement residue, lime efflorescence, rust stains and dirt on mineral substrates and various metals. For concrete surfaces, subsequent efflorescence is avoided.

Concrete cleaner

RECKLI Concrete cleaner is a highly-concentrated cleaning agent for the removal of cement residue, lime efflorescence and rust stains on mineral substrates.

Concrete Remover

RECKLI Concrete Remover is an aqueous acidic cleaner, suitable for the removal of concrete stains and spills from shuttering, working equipment and construction machinery. It can be applied without the formation of mists or aerosols.

Epoxy Cleanser

RECKLI Epoxy Cleanser is a cleaning agent for the removal of dirt from tools and working surfaces in the application and processing of RECKLI polyurethane and epoxy resin products.

Thinners

EK-PU-Thinner

RECKLI EK-PU-Thinner is a thinning material for use with RECKLI one-component polyurethane resin. The product is suitable for the cleaning of concrete formwork and tools with stubborn dirt.

Tools

Tools

RECKLI Formliner Knife

Rugged, handy knife with stationary blade for cutting RECKLI Formliners 2/(...).

RECKLI Mixing Pail

Solid plastic pail with two handles for a permanent action. Available in sizes of 40-L-content and 75-L-content.

RECKLI Spiral Stirrer

Suitable for electric drilling maschines, for mixing liquid or pasty material.

RECKLI-Profile Knife

Profiled knife for later cutting of single-piece moulds made of elastic silicones or polyurethanes, profile leads to a matching effect.

RECKLI-Tool-Kit

Contains: Formliner knife, Serrated Trowel, Spiral Stirrer, Grinding Disk.

Toothed Smoother

The RECKLI Toothed Smoother is a tool for the uniform application of materials in paste or fluid form. The sheet size is 14x28cm, the tooth depth is approx. 2mm.

706.549.6787