Concrete removal agents

RELEASE WAX TL

A ready-to-use concrete removal agent to apply to US Formliner formliners and solvent resistant, absorbing casing bases. It does not cause any adhesion issues when further processing the concrete.

Stripping Wax TL-Eco

RECKLI Stripping Wax TL-Eco is a high-quality, dilute, demoulding agent from renewable material, specially developed for RECKLI formliners. The product physically works via film formation. It is suitable for application on non-absorbent formwork made of sealed wood or plastic.

STRIPPING WAX TL-SO

A ready-to-use concrete removal agent for long encasing periods. The properties coincide with the Release Wax TL. A chemically active release effect ensures a problem-free removal in the case of drying periods of more than 24 hours.

STRIPPING WAX TL-W

A watery, ready-to-use concrete removal agent, it is suitable for use with US Formliner formliners as well as non-absorbent casing bases. It protects from staining and imprints, without causing adhesive problems during later finishing.

Effect Impregnation

OS Intensive

RECKLI OS Intensive is a dilute impregnation with a highly cross-linked acrylate polymer base. The product is especially suitable in treating vertical, exposed concrete surfaces.

OS W

RECKLI OS W is a dilute impregnation with a polymer base. The product is suitable for the handling of absorbent mineral substrates.

Graffiti

Graffix Basic

RECKLI Graffix Basic is a dilute impregnation for the treatment of concrete surfaces and other hard, absorbent mineral substrates. It demonstrates a UV-stable, breathable and open to water vapor diffusion protective impregnation with anti-adhesion properties.

Graffix Cleaner

RECKLI Graffix Cleaner is a gel-type cleaning agent for the removal of graffiti. It is specially formulated for application on concrete surfaces, which have been treated with RECKLI Graffix Basic.

Supplementary Products

Formliner Adhesive 1K

RECKLI 1K formliner adhesive is a moisture-hardening, solvent-free, single-component plastic adhesive for the low-tension adhesion of RECKLI textured formliners. This adhesive is suitable for use on wood, steel and polyurethane elastomers.

SO Formliner Adhesive

RECKLI SO formliner adhesive is an elastified, solvent-free, two-component epoxy-based plastic adhesive. It is especially designed to glue RECKLI textured formliners to wooden or steel shells. This adhesive boasts good adhesion to wood, steel and polyurethane elastomers.

Surface Protection

OS D

RECKLI OS D is a colorless, dilute impregnation with a silicone base. The product is suitable for the handling of absorbent concrete components.

OS HO

RECKLI OS HO is a colorless, dilute impregnation. The product is suitable for the treatment of absorbent, mineral substrates and particularly for the protection of façades or other vertical surfaces made of concrete.

OS Intensive

RECKLI OS Intensive is a dilute impregnation with a highly cross-linked acrylate polymer base. The product is especially suitable in treating vertical, exposed concrete surfaces.

OS Premium

RECKLI OS Premium is a colorless, solvent-free impregnation. The product is suitable for the treatment of absorbent, mineral substrates and particularly for the protection of concrete paving, slabs and façades.

Tools

ELASTO SPATULA

A brushable and spatula-spreadable two-component synthetic. The product is suited for touching up on and repairing molds, installations, formliners and forms made of RECKLI PURE elastomers.

Formliner Cleanser

RECKLI Formliner Cleanser is a cleaning agent to remove grease from the rear sides of RECKLI formliners with the numerals 1/... and 2/... before adhesion with RECKLI formliner adhesives. It is also suitable for the removal of wax residue in the preparation of barriers on RECKLI formliners with PUR blocking paste.

MOLD WAX

A ready-to-use release agent for mold making, it ensures a safe release effect when using two-component resins on polyurethane or epoxy-resin bases. The wax is also suited for separating silicone from silicone.

RECKLI Formliner Knife

Rugged, handy knife with stationary blade for cutting RECKLI Formliners 2/(...).

RECKLI Mixing Pail

Solid plastic pail with two handles for a permanent action. Available in sizes of 40-L-content and 75-L-content.

RECKLI Spiral Stirrer

Suitable for electric drilling maschines, for mixing liquid or pasty material.

RECKLI-Profile Knife

Profiled knife for later cutting of single-piece moulds made of elastic silicones or polyurethanes, profile leads to a matching effect.

RECKLI-Tool-Kit

Contains: Formliner knife, Serrated Trowel, Spiral Stirrer, Grinding Disk.

RELEASE WAX TL

A ready-to-use concrete removal agent to apply to US Formliner formliners and solvent resistant, absorbing casing bases. It does not cause any adhesion issues when further processing the concrete.

STRIPPING WAX TL-SO

A ready-to-use concrete removal agent for long encasing periods. The properties coincide with the Release Wax TL. A chemically active release effect ensures a problem-free removal in the case of drying periods of more than 24 hours.

STRIPPING WAX TL-W

A watery, ready-to-use concrete removal agent, it is suitable for use with US Formliner formliners as well as non-absorbent casing bases. It protects from staining and imprints, without causing adhesive problems during later finishing.

Toothed Smoother

The RECKLI Toothed Smoother is a tool for the uniform application of materials in paste or fluid form. The sheet size is 14x28cm, the tooth depth is approx. 2mm.